Description: "WHDLoad splash delay"
Range: -1 - 500
This option specifies the time in 1/50ths seconds that WHDLoad shows the
information window at startup. If SplashDelay/K/N is lower than
ReadDelay/K/N it is ignored and the window is displayed using the time from
ReadDelay/K/N. The window is displayed at least as long as Preload/S is
If the option is set to 0 no window will be displayed at all. If the option
is set to -1 a Start button is added to the window and it remains open until
this button has been pressed.