Using Hard Drives

When it comes to using emulated hard drives in FS-UAE, you have several choices:

  • You can mount directories on your system as Amiga volumes (“directory hard drives”).
  • You can use hard drive images (HDF files).
  • You can mount zip files as Amiga volumes.
  • You can in some cases use a real Amiga hard drive / compact flash card.

The best choice depends on how you want to use it. The most convenient is directory hard drives, and I recommend to use this unless you have a good reason not to, especially with FS-UAE v2.1.28+, when support for file permission and metadata was added.

Using Directory Hard Drives

The advantages of using directory hard drives compared with other approaches are:

  • It will work with all Amiga models, with no Amiga-side setup needed. The volumes (directories) will automatically be accessible from the Amiga.
  • You’ll have “unlimited” Amiga storage capacity (as long as you have enough free space on your system), and you don’t have to allocate space upfront as you must do with HDFs.
  • You can also access the files directly from the host system, and you can easily add new files to your Amiga drive from the host system.

Note: you should be somewhat careful about modifying the directory hard drive from the Amiga and from the host system at the same time. Ideally, you should only modify the hard drive from the host system when FS-UAE is not running, since some information about the file system may be cached in the Amiga.

Amiga and Host File Names

Some file names which are valid on the Amiga are not allowed on the host file system. This is particularly true on Windows, which has one of the most restrictive set of allowed file names (Linux and OS X are more flexible).

FS-UAE handles this by “escaping” the invalid Amiga file names so the can be stored on the local file system. This is only done when necessary, so most file names will not be escaped. Also, the escaping is done so the host file name is valid on all supported FS-UAE platforms. For example, the following file name is valid on the amiga:

Foo\Bar

This is not valid on Windows however, so the file name is escaped and stored as Foo%5cBar. The Amiga will see a file called Foo\Bar when it accesses a directory with a host file called Foo%5cBar. Since Foo\Bar is not allowed on Windows, the file is stored as Foo%5cBar on *all* platforms. This makes the directory hard drives portable across multiple operating systems.

See also “Extracting Amiga Archives” for more relevant information.

Amiga File Permissions

The information in this section applies to FS-UAE v2.1.28+. Earlier versions do not store file permissions.

When FS-UAE looks up existing files in a directory hard drives, it initializes metadata about the file either from the host file system, or if it exists, from an accompanying metadata file.

When a file has an accompanying metadata file, date/time, file permissions and comment are read from the metadata file. If a metadata file does not exist, then:

  • The file will get the default permissions: ----rwed.
  • The file date/time will be read from the last modified timestamp of the host file.
  • The file will have no file comment.

When files are created/modified from within the Amiga, the host file mtime (last modified time) is updated based on the Amiga file date/time. FS-UAE then decides if it needs to store more information about the file in a metadata file:

  • If the file has a file comment, FS-UAE will create a metadata file.
  • If the file has non-default file permissions, FS-UAE will create a metadata file.
  • FS-UAE reads back the last modified time from the host file, and checks that the time was stored with high enough precision (Amiga files are stored with 1/50s precision). If the time could not be stored accurately, FS-UAE will create a metadata file.
  • If the file already has a metadata file, FS-UAE will always update the metadata file.

Additional metadata is stored in files with .uaem extension. If the original file is called Image.jpg, the additional metadata is stored in Image.jpg.uaem in the same directory. The metadata is stored in a text format, and you can even edit this file manually from the host side to alter the information about the file. Here’s an example of the content of a metadata file (where “hello” is a file comment):

----rwed 2013-02-12 21:20:52.02 hello

Note: file permissions / comments are not stored with FS-UAE < v2.1.28.

Extracting Amiga Archives

If you have an .lha archive with Amiga software, you’ll have two choices when you want to extract it:

  • Extract the .lha archive to the directory hard drive from the host system.
  • Copy the .lha archive to the directory hard drive, start FS-UAE and extract the archive with the “lha” program (or similar) inside the Amiga.

In many cases, both approaches will work well, but there are some cases where you should extract the archive from inside the emulated Amiga:

  • If the archive contains Amiga file names which are illegal on the host file system, you’ll not be able to extract the archive correctly on the host system.
  • The archive can contain file metadata (date/time, file permissions, comment), and if you extract the archive on the host system, information will be lost (the files will get the default file permissions ----rwed).

So whether you can extract an archive without (significant) loss of information on the host system depends on the archive. To be sure, you can always extract archives from inside the Amiga.

Using Hard Drive Images (HDF Files)

HDF files are “raw files” containing the content of hard drives, used directly by the Amiga as storage devices (like it would use a real hard drive). This means that the Amiga manages the file system.

There are two common variants of HDF files:

  • A full HDF image of a hard drive, often referred to as HDF files in RDB (Rigid Disk Block) format. This HDF file must be partitioned, like a real hard drive, before that Amiga can use it.
  • A HDF file which only contains a single partition. Behind the scenes, FS-UAE will fake a full HDF image with the content of the HDF file as the single partition in the drive.

Using HDF Files in RDB Format

When you mount a .hdf file as a hard drive in FS-UAE, FS-UAE will automatically recognize it as an RDB file when the HD is already partitioned (the file begins with the “RDSK” header). If the file is completely empty, FS-UAE will think that it is a partition HDF instead, but you can use the hard_drive_x_type options to force FS-UAE to handle it as an RDB file.

Note: When you use the ADF/HDF creator in FS-UAE Launcher to create a HDF file in RDB format (v2.1.26+), the file is created in a way that allows FS-UAE to autodetect it as an RDB file.

Empty hard drive images must be partitioned and formatted before use. Workbench may come with a tool called “HDToolBox” which you can use to partition the image. By default, the hard drive is accessed through a HD controller called uaehf.device. You need to tell HDToolBox to use this device when you start it, for example by running the command:

DF0:Tools/HDToolBox uaehf.device

Alternatively, if you emulate an Amiga 600 or Amiga 1200, you can attach the drives to an emulated IDE controller instead (see hard_drive_x_controller). When you use this controller, you can only use hard drive images which are less than 4 GB. The uaehf.device does not have this limitation, so using the default uaehf.device is recommended unless you have a very good reason not to use it. Additionally, uaehf.device is likely more efficient (faster) to use.

After you have partitioned the file, you may need to restart the Amiga. Then you can proceed to format the partition(s).

Using Partition HDF Files

When you use an empty partition HDF file, you’ll not partition it – but you still need to format it inside the Amiga before you can use it.

FS-UAE needs to know the geometry of the HDF file. Currently, FS-UAE assumes – and only supports – the default geometry (sectors = 32, surfaces = 1, reserved = 2, block_size = 512). There is no option to override this yet. This is compatible with most HDF partition files < 512 MB.

Mounting ZIP Files as Hard Drives

FS-UAE supports mounting ZIP files as hard drive. This works more or less like a read-only directory hard drive (though there is currently no support for metadata files in this case).

When you mount ZIP files and start FS-UAE via FS-UAE Launcher, the ZIP file is handled differently:
– The ZIP file is extracted to a temporary directory
– This temporary directory is mounted as a directory hard drive in FS-UAE
– When FS-UAE is done running, the Launcher scans the temporary directory for changes and saves the changes to the state folder, and when you run the same configuration later, the changed files are merged with the content from the zip file.

Via FS-UAE Launcher, ZIP files work more like a hard drive *template*, and you get support for metadata files and get a writable file system. The ZIP file itself will remain untouched.

Using Real Hard Drives

Note: This is not an officially supported feature, but it is described here because it still works on some platforms. This does not work on MS Windows.

On Unix-like systems, devices can be accessed like files. This means that you can mount a block device (for example a real hard drive or a compact flash (CF) card) as a hard drive, and FS-UAE will use it like it was a HDF file.

You need to make sure FS-UAE have read and write access to the device (you may need to chmod it and/or change device ownership), and also that you use the correct device -you don’t want to overwrite another device by accident.

People have been using this feature on Linux and OS X, but no guarantee is given that it works. The most common use is to mount a CF card which is also used as a hard drive on a real Amiga.

71 thoughts on “Using Hard Drives

  1. Dear mates, I installed Amiga OS 4.1 successfully but by trying to add in fsuae an additional host folder as
    harddisk (what works perfectly under ClassicWB) the image is not booted anymore. Only
    a minimum shell with no features is shown.
    How can I tell fsuae which harddisk is the boot disk. Thanks a lot and kind regards,
    Stephan

    • Hi, unfortunately, using folders as HD when using AmigaOS 4.1 is not yet supported in FS-UAE :-/

  2. I’m having trouble setting up AmigaOS 4.1 on my iMac with FS-UAE v2.8.3. Whenever I try to boot with the ISO image listed in the CD-ROM I get an error message of “UAE boot rom cannot be used with PPC native OS” on a blank pink screen. I’ve followed all the steps of others who claim to have set this up correctly but it just doesn’t seem to want to work for me. I have successfully set up several configs in UAE without trouble. I have selected the A4000, 3.1 ROM, Cyberstorm PPC (AmigaOS 4.x) model, with the CyberStorm PPC accelerator board and made sure that the cyberstormppc.rom file is in the Kickstarts directory. I’ve also made sure that QEMU-UAE has been placed in the Plugins directory (although it doesn’t show up in the “settings/plugins” list for some reason). I’m sure it’s something I have forgotten but I simply can’t seem to find it. Is there anything you could suggest? Thanks for your help.

    • Hi, most likely you have added either a directory hard drive, or enabled uaegfx.card or something like that. These features cannot be used with AmigaOS 4.1 in FS-UAE, currently.

Leave a Reply

Your email address will not be published. Required fields are marked *